If you have a BOB stroller, then you know how important it is to keep the tires in good condition. A flat tire can make your stroller difficult to push and can be very frustrating. In this blog post, we will show you how to change BOB stroller tire quickly and easily.
Table of Contents
How To Change a BOB Stroller Tire: Step-By-Step Guide
So, how exactly do you change a BOB stroller tire? Well first, let’s make sure you’ve got the right equipment. You will need a wrench or a socket set, as well as possibly a wheel cap removal tool.
If you do not have the correct tools, you may end up damaging the stroller or hurting yourself.
Now, let’s take a look at the steps below…
Step One: Find The Replacement Tire First
You will first need to find the replacement tire. This can usually be found at your local baby or sporting goods store. Be sure to get the correct size and type of tire for your BOB stroller.
Step Two: Apply The Parking Brake
Before you start to change the tire, be sure to apply the parking brake. This will help to keep the stroller from running away from you while you are working on it.
Step Three: Lock The Swivel Feature Forward
Next, you will need to lock the swivel feature forward. This can be done by pushing the button on the front of the stroller and turning it to the locked position.
Step Four: Remove The Wheel Cap
The next step is to remove the wheel cap. This can be done by unscrewing it or popping it off.
Step Five: Loosen The Lug Nuts
Now, you will need to loosen the lug nuts. This can be done with a wrench or a socket set. Be sure to loosen them all the way so that the tire can be removed easily.
Step Six: Remove The Tire
Once the lug nuts are loosened, you can remove the tire. Be careful not to pinch your fingers while doing this!
Step Seven: Put The New Tire On
Now, it is time to put the new tire on. Place the wheel in the middle of the stroller and be sure that the valve stem is facing the correct way.
After you have placed the wheel in the correct position, you can begin to tighten the lug nuts. Be sure to tighten them evenly so that the wheel is balanced.
Step Eight: Put The Wheel Cap Back On
Once the tire is tightened, you can put the wheel cap back on. This can be done by screwing it on or popping it into place.
Step Nine: Release The Parking Brake
Finally, you can release the parking brake and take your stroller for a test drive!
Be sure to check the tires regularly and replace them when needed. This will help keep your stroller in good condition and running smoothly.
Now that you know how to change your BOB stroller tire, take a look at the steps to change the inner tubes of a BOB stroller.
How To Change A Bob Stroller Tire Inner Tube: Step-By-Step Guide
If the inner tubes of your BOB stroller tire become damaged or worn out, you can easily replace them. Take a look at the steps you should take…
Step One: Locate The Replacement Tube
The replacement tube can usually be found at your local baby or sporting goods store. Be sure to get the correct size and type of inner tube for your BOB stroller.
Step Two: Remove The Wheel Cap
The next step is to remove the wheel cap. This can be done by unscrewing it or popping it off.
Step Three: Loosen The Lug Nuts
Now, you will need to loosen the lug nuts. This can be done with a wrench or a socket set. Be sure to loosen them enough so that the inner tube can be removed easily but do not remove them completely, as this will make it difficult to put the new tire on.
Step Four: Remove The Inner Tube
Once the lug nuts are loosened, you can remove the inner tube. Be careful not to pinch your fingers while doing this.
Step Five: Put The New Inner Tube On
Before you put the new inner tube on, be sure to fill it in with the right amount of air. This can be done with a bike pump or an air compressor.
If you do not put enough air in the tube, it will not hold up and could cause problems while you are using the stroller.
Place the wheel in the middle of the stroller and be sure that the valve stem is facing the correct way.
After you have placed the wheel in the correct position, you can begin to tighten the lug nuts. Be sure to tighten them evenly so that the wheel is balanced.
Step Six: Put The Wheel Cap Back On
Once the inner tube is tightened, you can put the wheel cap back on. This can be done by screwing it on or popping it into place.
Step Seven: Release The Parking Brake
Finally, you can release the parking brake and test the stroller out.
Conclusion
Changing the inner tubes on a BOB stroller tire is not difficult, but it is important to follow the right steps. By using the tips above and making sure you have the right equipment, you can make sure the process goes smoothly.
